Resources
Products
Single Ply Commercial Roofing
Bituminous Commercial Roofing
PVC Commercial Roofing Accessories
Built to withstand the test of time, our PVC was made to resist the toughest weather conditions and chemicals.
Our PVC is a flexible, thermoplastic membrane manufactured using an ultraviolet-resistant polyvinyl chloride. PVC membranes deliver a pliable and durable sheet with excellent weathering characteristics and resistance to harsh chemicals and industrial pollutants.
Accessories
JM 3oz Polyester Slipsheet
Use: JM 3 oz Polyester Slipsheet is intended for use as a separation layer between an existing roof system and a new single ply recover system.
Material: 3.0 oz/yd2 (102 g/m2 ) needle-punched, non UV-resistant polyester fabric.
Color: White
JM Polyester Mat Protection Slipsheet
Use: JM Polyester Mat Protection Slipsheet is intended for use as a separation layer between extruded polystyrene insulation and roofing membrane in protected membrane (inverted) roof assemblies, as well as a separating sheet in some recover systems. It is also used as a protective layer between pavers and JM single ply membrane.
Material: 9.0 oz/yd2 (305.15 g/m2 ) needle-punched, UV-resistant polyester fabric.
Color: White
JM PVC Coated Metal
Use: Fabricated by the contractor into metal flashings and edge details. It is used to provide monolithic water-tight protection for both adhered and mechanically fastened roofing assemblies.
Materials: 20 mil (0.51 mm) UV-resistant PVC (polyvinyl chloride) with Elvaloy® KEE (ketone ethylene ester) membrane laminated to 24 gauge (0.6 mm) galvanized steel.
Colors: White; Grey; Sandstone; and Black
JM PVC Detail Membrane
Use: To easily form flashings around corners and penetrations. Specifically designed for use in areas that cannot be properly detailed with PVC field membrane.
Material: 75 mil (1.91 mm) thick, reversible, flexible, non-reinforced, UV-resistant PVC (polyvinyl chloride) with Elvaloy® KEE (ketone ethylene ester).
Colors:
- White/Grey
- Grey ES/White
- Sandstone/White
- Sandstone ES/White
- White/Charcoal
JM PVC Detail Strip
Use: Primarily use to "strip-in" flashing details, gravel stops, PVC Coated Metal joints, and exposed fasteners in the roof field.
Material: 60 mil (1.52 mm) thick, reinforced, UV-resistant PVC (polyvinyl chloride) with Elvaloy® KEE (ketone ethylene ester).
Colors:
- 6" - Black/White
- 8" - White/Grey and Sandstone/White
JM PVC Heavy Duty Walkpad
Use: Provide a safe, stable and maintenance-free walkway for quick and easy access to rooftop equipment in high traffic areas.
Materials: 150 mil (3.81 mm) thick, textured, reinforced, UV-resistant PVC (polyvinyl chloride) with Elvaloy® KEE (ketone ethylene ester).
Color: Safety Yellow
JM PVC Penetration Pan
Use: Unit used to seal uneven penetrations through the membrane that are difficult to flash. The penetration pan is slit on one side to allow for positioning around objects to be flashed. A welding tab is included to seal the penetration pan once installed.
• For use with JM EPDM/PVC Pourable Sealer
• Refer to JM PVC, TPO, or EPDM applicator guides or detail drawings for instructions
Material: 125 mil (3.18 mm) thick, one piece molded unit, vacuumformed and fabricated from impact-resistant rigid PVC (polyvinyl chloride).
Color: Grey
JM PVC Pipe Boots
Use: A smooth, cone-shaped boot for traditional or split-pipe flashing applications to securely seal the penetration. Pipe boots eliminate the need for field fabrication.
Material: Flexible, non-reinforced, UV-resistant PVC (polyvinyl chloride) with Elvaloy® KEE (ketone ethylene ester).
Colors: White; Grey; and Sandstone
JM PVC Profile
Use: Used as a decorative rib to simulate the aesthetics of a standing seam metal roof. This accessory is for use on fully adhered JM PVC and JM PVC SD Plus roofing systems with 60 mil or greater membranes.
Materials: UV-resistant PVC (polyvinyl chloride) and an Elvaloy® KEE (ketone ethylene ester). Preformed, non-reinforced, extruded, and heat-weldable.
Colors: White; Sandstone; and Grey
JM PVC Safety Strip
Use: Primarily used as a safety warning line for roof perimeters.
Material: 45 mil thick, reinforced, UV-resistant PVC (polyvinyl chloride) with Elvaloy® KEE (ketone ethylene ester).
Colors: Yellow
JM PVC T-Joint Patch
Use: To seal seam laps where perimeter and/or header sheets intersect (T-Joint) in PVC systems.
Material: Flexible, non-reinforced, UV-resistant PVC (polyvinyl chloride) with Elvaloy® KEE (ketone ethylene ester).
Colors: White; Grey; and Sandstone
JM PVC Universal Corners
Use: Designed in a waffle pattern for easy installation around any inside and outside corners.
Material: Flexible, non-reinforced, UV-resistant PVC (polyvinyl chloride) with Elvaloy® KEE (ketone ethylene ester).
Colors: White; Grey; and Sandstone
PVC Custom Accessories
Please click on the PVC custom accessory quote form link below to view and/or downlowd the submission form.
JM PVC Split Pipe Boot
Use: A prefabricated, reinforced 60 mil JM PVC (KEE), round-shaped 1" to 6" (2.54 cm to 15.24 cm) split-pipe boot for flashing application. Pipe boots minimize the need for field fabrication. Custom sizes and colors are available upon request. Contact your JM representative for minimum order quantity and lead time.
Material: JM PVC 60 mil reinforced membrane containing the optimal amount of DuPont™ Elvaloy® KEE (Ketone Ethylene Ester) that is factory fabricated into a onepiece round split-pipe boot.
Color: White
PVC Square Pipe Boot
Use: A prefabricated, reinforced 60 mil JM PVC (KEE) square boot in 2" and 4" (5.08 cm and 10.16 cm) sizes for tube-flashing application. Pipe boots minimize the need for field fabrication. Custom sizes and colors are available upon request. Contact your JM representative for minimum order quantity and lead time.
Material: JM PVC 60 mil reinforced membrane containing the optimal amount of DuPont™ Elvaloy® KEE (Ketone Ethylene Ester) that is factory fabricated into a onepiece square split-pipe boot.
Color: White
PVC Walkpad
Use: Provides a safe, stable and maintenance-free walkway for quick and easy access to rooftop equipment in high traffic areas.
Material: 72 mil (1.83 mm) thick, textured, reinforced, UV-resistant PVC (polyvinyl chloride) with Elvaloy® KEE (ketone ethylene ester).
Color: Grey
